Motorcycle Rear Brake Caliper for Italika 170z 200z 250z – Aluminium Replacement

This rear brake caliper is made for the Italika 170z, 200z and 250z motorcycles. It is supplied as a single caliper unit and is intended for the rear brake position. The body is listed as aluminium, and the lining hardness is given as 15020282 kN/cm². If you are maintaining or repairing one of these Italika models, this caliper is a model-specific replacement option rather than a universal part. The listing is deliberately focused on the information available: material, compatible models, lining hardness, rear brake use and pack quantity. No further dimensions, colours or performance figures are stated in the source, so there are no added claims about braking distance, wear life or weather resistance.

Features and Construction

The main construction detail is the aluminium caliper body, paired with a lining hardness figure of 15020282 kN/cm². That specification is useful when you are comparing the part against the old caliper or checking it against a workshop record. The caliper is also tied to a specific model range, so fitment depends on your motorcycle being an Italika 170z, 200z or 250z.

Material and Build

The caliper body is stated as aluminium. In a rear brake caliper, aluminium is commonly used because it is a light metal that can be formed into the required housing shape, but this listing does not make any additional claims about strength, corrosion resistance or weight saving. The only material fact provided is aluminium, and the only friction-related figure provided is the lining hardness of 15020282 kN/cm². Treat those as the key specification points when assessing the part.

Size and Practical Fit

No length, width, height, piston diameter or mounting measurements are given in the source information. That means fitment should be confirmed through the stated motorcycle models: Italika 170z, 200z and 250z. The caliper is listed for the rear brake position, and the product is supplied as one unit. If your model differs from those three, or if you are unsure about the mounting pattern, check before ordering.

Uses and Placement

This is a rear brake caliper for a defined set of Italika motorcycles. It is aimed at replacement or repair rather than as a universal accessory. The part can be considered for a workshop repair, a home maintenance job on a compatible Italika, or as a spare caliper kept for future servicing.

Event or Professional Use

For a motorcycle workshop, having a model-specific caliper available can reduce the time spent searching for a compatible rear brake part. The listing states the compatible models clearly, so a technician can check the Italika 170z, 200z or 250z before fitting. The aluminium body and stated lining hardness give two concrete reference points for a repair record or parts inventory.

Everyday Home Use

For a home mechanic working on a compatible Italika, this caliper is a replacement part for the rear brake. It is not described as a complete brake kit, and no brake fluid, pads, bolts or tools are included beyond the caliper itself. Because the source gives no step-by-step fitting guide, the practical approach is to confirm the model, replace the rear caliper and then have the brake system checked and bled properly.

Benefits and Buying Value

The value here comes from buying a caliper that is listed for a specific Italika model range and a specific rear brake position. It avoids the uncertainty of a generic part that may not match the stated models. The aluminium material and the recorded lining hardness also make the specification easier to verify against your existing setup.

Reuse and Low Maintenance

This is a replacement component rather than a maintenance-free upgrade. The source does not give a service interval, wear life or cleaning routine. Sensible care is limited to keeping the caliper and surrounding brake area clean during normal motorcycle maintenance and checking the brake system regularly. Any inspection or replacement of brake components should be carried out with the correct workshop practice for your Italika model.

Why Choose This Product

Choose this caliper if you need a rear brake caliper for an Italika 170z, 200z or 250z and the aluminium body and 15020282 kN/cm² lining hardness match your requirements. It is supplied as one caliper, so it suits a single rear brake replacement. No price comparison, lifespan claim or performance guarantee is made, because the source does not provide that information.