ALFARC-FS135 Crossing Rack 135mm Carbon Fibre FPV Frame for Racing

The ALFARC-FS135 Crossing Rack is a 135mm wheelbase FPV frame made from 3K carbon fibre. It is intended for racing cars and free fancy flying competitions, and its X structure provides a base for compact electronics. The frame has 3mm arms, a 2mm upper plate, a 2mm lower plate, and 1.5mm other plates. It supports F4/F3 flight controllers or flying towers with 20x20mm hole spacing, 12XX-14XX brushless motors, 10-100A ESCs, and propellers up to 3 inches such as 2535 and 30XX. It also accommodates Micro Swift, micro Sparrow, mini camera, or other lens, and 2/6S 500-800mAh batteries. The pack contains one Crossing Rack in FS135 colour.

Features and Construction

The frame is built around a 135mm wheelbase and an X structure. Its carbon fibre plates and arms are sized to suit compact FPV components without adding unnecessary bulk to the build.

Material and Build

The ALFARC-FS135 uses 3K carbon fibre for its main structure. Arms are 3mm thick, the upper plate is 2mm, the lower plate is 2mm, and other plates are 1.5mm. These stated thicknesses give a defined base for mounting electronics and motors. The X structure is intended for racing and free fancy flying competitions.

Size and Practical Fit

The 135mm wheelbase and 20x20mm flight controller hole spacing allow the frame to accept F4/F3 flight controllers or flying towers. It supports 12XX-14XX brushless motors and 10-100A ESCs. Propellers up to 3 inches, including 2535 and 30XX sizes, can be used. The frame also fits 2/6S 500-800mAh batteries.

Uses and Placement

The frame is intended for FPV racing and free fancy flying. Its layout supports common compact camera and electronics choices, making it relevant for pilots building or rebuilding a small quadcopter.

Event or Professional Use

For racing and free fancy flying competitions, the X structure and 3K carbon fibre construction provide a rigid platform. The frame supports Micro Swift, micro Sparrow, mini camera, or other lens, allowing pilots to fit a camera suited to their event requirements. It accepts 2/6S 500-800mAh batteries for power.

Everyday Home Use

For practice and casual flying, the ALFARC-FS135 can be built with F4/F3 or flying tower electronics, 12XX-14XX motors, and 10-100A ESCs. Its 135mm wheelbase and 3-inch propeller limit suit compact setups. The frame comes as one Crossing Rack in FS135 colour, ready for component installation.

Benefits and Buying Value

The frame offers a defined set of specifications for pilots who need a 135mm carbon fibre base. Its compatibility list covers common flight controllers, motors, ESCs, cameras, and batteries, which can simplify component selection.

Reuse and Low Maintenance

The 3K carbon fibre construction is a material choice that can be wiped clean and inspected after flights. The frame's plates and arms are replaceable in principle as part of a standard build, but no specific maintenance schedule or lifespan is stated by the manufacturer. Users should follow their own care routines for carbon fibre parts.

Why Choose This Product

Choose the ALFARC-FS135 if you need a 135mm wheelbase frame with 3mm arms, 2mm upper and lower plates, and 1.5mm other plates. It supports F4/F3 or flying tower flight controllers with 20x20mm hole spacing, 12XX-14XX brushless motors, 10-100A ESCs, propellers up to 3 inches, and 2/6S 500-800mAh batteries. It also fits Micro Swift, micro Sparrow, mini camera, or other lens. The pack includes one Crossing Rack in FS135 colour.